Fire Damper Testing Co.Get a quote
Pages ▾

Fire Damper Maintenance and Repairs

What happens after the report: clearing failed dampers, fitting access where there is none, and making good the fire-stopping around the frame.

Get a quote
A flexible ventilation duct seen through a ceiling access opening

Rules for repairs and retests

  • StatuteFire Safety Order 2005, article 17: faults put rightSource: legislation.gov.uk
  • Test intervalAfter every failed or no-access result, then retestedSource: BESA guidance
  • Ask forA retest record showing each repaired damper now passesSource: BESA VH001 reporting
  • Who does itA competent person, using the maker's parts and fitting methodSource: Approved Document B

Why fire dampers fail

Most failures come from the building around the damper rather than the damper itself. Dust settles on the blades and in the tracks. A fusible link is painted over during decorating. A cable tray is fixed through the duct. A ceiling goes in with no way to reach the damper above it. None of these are visible from the room below.

The yearly test finds them. Fire damper maintenance is the work that clears them, and it is the part of the job that most often gets left on the report and forgotten.

Repairs a testing firm can usually do

  • Cleaning the blades, springs and tracks so the damper closes fully.
  • New fusible links where the old one was missing, painted or the wrong rating.
  • Freeing seized blades and adjusting springs and latches.
  • Removing obstructions such as screws, cables or fixings through the damper.
  • Fire-stopping the gap between the damper frame and the wall or floor.
  • Replacement of a damper that is corroded, bent or past repair.

Fire damper access panels

A damper nobody can reach cannot be tested, and a report full of no-access results is not much use to you or your fire risk assessor. Fitting access usually means two panels: one in the duct next to the damper and one in the ceiling or shaft below. Where the ceiling is fire-rated, the ceiling panel has to match its rating.

It is worth fitting panels in the same visit as other remedials, because the ceiling is already open. After that, every future test is quicker and cheaper. Our article on dampers with no access panels sets out the options.

Planned maintenance between tests

In clean office air, one test and service a year is often enough. Kitchen extracts, workshops and anything carrying dust or grease need more, because the blades clog faster. BESA guidance notes that dampers in dirty conditions may need checking more than once a year.

Health buildings follow their own pattern, with planned samples and quicker fixes for critical dampers. See the IHEEM technical guidance if you manage an NHS or private healthcare site.

Pricing remedial work

Remedials are usually quoted after the test, item by item, once the firm knows what failed. You can avoid surprises by asking for a rate card at the start: a price for a new link, a clean, an access panel and a replacement damper. Our fire damper testing cost guide has the published figures we could find.

Maintenance and repair questions

What happens when a fire damper fails its test?

The report should give the reason and a recommended fix. Many failures are cleared the same day with a clean or a new link. Others need a second visit, and the damper should be treated as faulty until it passes.

Can the testing firm do the repairs?

Usually, yes. Ask for remedial prices as a separate line on the test quote, so you know the cost of common fixes before the report arrives.

Who should fit access panels?

A firm that knows ductwork and fire-stopping. A panel cut into a fire-rated ceiling or shaft must keep its rating, so it is not a general builder's job.

Is a damper repair building work?

Replacing a damper can affect the fire separation of the building, so treat it as more than a like-for-like swap. Follow Approved Document B and the manufacturer's fitting instructions.

Get failed dampers put right

Send the postcode and your contact details. If you have a failed test report, mention it when the firm calls, because it lets them price the repairs line by line.

We look for a damper testing firm that works in your area and let you know which one before anything else happens. Your details reach that firm only once you agree, and there is no charge to you.

Your building and contact details
Get a quote