Fire Damper Testing Co.Get a quote
Pages ▾

Fire Damper Testing Regulations

Which laws and standards apply, how often dampers must be tested, who is responsible and what happens if testing is missed.

Get a quote
White ducts and conduits on an exposed ceiling

The legal duty

In England and Wales, dampers in occupied buildings are caught by article 17 of the Regulatory Reform (Fire Safety) Order 2005, under which the responsible person must make sure fire safety facilities, equipment and devices are kept under a suitable system of maintenance and kept in efficient working order and good repair.

The Order does not list fire dampers by name. They are covered because they are part of how a building holds fire inside one compartment, and the fire risk assessment is expected to look at them. In Scotland the same duty comes from the Fire (Scotland) Act 2005 and the regulations made under it.

How often fire dampers must be tested

The interval comes from the British Standard rather than the law. BESA explains that BS 9999 expects dampers to be tested by a competent person when they are installed and then at regular intervals of no more than one year. Spring-operated dampers get a drop test. Dampers in dusty or polluted conditions may need testing more often.

Blocks of flats are covered by the residential code, BS 9991, rather than BS 9999. Fire risk assessors apply the same yearly expectation to the dampers serving common parts, so plan on an annual test there too (BESA guidance).

Health buildings can follow a different pattern. HTM 03-01 sets yearly checks for critical systems, and the IHEEM technical guidance on fire dampers describes a planned sample for lower-risk dampers, rotated so each one is still covered within a fixed number of years.

Standards for installation and reports

BESA publishes the industry standards for ductwork: DW 145 for installing fire and smoke dampers, and VH001 for inspecting and testing them and writing up the results. Ask any firm you are considering which one their report follows. The member list is on the BESA website.

Where dampers are fitted in new work or replaced, Approved Document B sets where they are needed and how they should perform.

Who does what

RoleWhat they doWhere it comes from
Responsible personArranges testing, keeps the records and makes sure faults are fixedFire Safety Order, article 17
Competent testerCarries out the test and writes the reportBESA guidance
Fire risk assessorChecks that testing happens and that failures are acted onFire Safety Order
Fire and rescue serviceEnforces, through notices and, in serious cases, prosecutionFire Safety Order, article 32

Higher-risk residential buildings

For blocks of flats in scope of the Building Safety Act 2022, the accountable person keeps a golden thread of information about the building. Damper registers and test reports belong in it, because they show the fire separation is being looked after.

What happens if testing is missed

The fire and rescue service can issue an enforcement notice requiring the work, or a prohibition notice restricting use of the building where the risk is serious. Under article 32 of the Order, a breach that puts people at risk of death or serious injury can lead to an unlimited fine or up to two years in prison, and company officers can be personally liable.

In practice the first sign is usually an action on the fire risk assessment or a question from an insurer. A current report covering every damper answers both. Our cost guide shows what testing a building usually costs, and the test log template helps keep the records in order.

Regulation questions we hear

Which British Standard covers fire damper testing?

BS 9999, the code of practice for fire safety in buildings, sets the test interval. BESA summarises it as testing on installation and then at least every year.

Is there a fire damper testing certificate?

There is no single official certificate. What you should get is a report covering every damper, with its result and photos, signed and dated by the firm that did the work.

What if the fire risk assessment says dampers have never been tested?

Treat it as an action with a date. Book a survey and test, fix what fails, and keep the report with the assessment. Our inspection page explains what the visit involves.

Tell us where the dampers are

Give us the building postcode and who to speak to. A damper count, a recent report or a ceiling plan all help the firm price it, but none of that is needed to start.

We look for a damper testing firm that works in your area and let you know which one before anything else happens. Your details reach that firm only once you agree, and there is no charge to you.

Your building and contact details
Get a quote